How to Fix Bike Gears


how to fix bike gears

Do you know how to fix bike gears? It can be a real bummer if you do not know how to replace them properly. This article will tell you how to fix bike gears.

The first thing that you should know is that a derailleur is the part that connects your chain to your pedal. The part has a sprocket on the top. To fix bike gears, you should remove the sprocket and the chain to find the gear. You need to undo the bolt that is holding the chain in place, and you will also need to tighten it up so that the chain can start working again.

Steps Involved In Changing The Bike Gears

A bicycle leaning against a wall

The next step in fixing your bike is to check your teeth alignment. If your teeth are off centered, then you need to adjust your tooth dimensions accordingly. If you want to know how to fix bike gears by yourself, then your first step should be to look at your tooth alignment. To do this, you will have to pull your toothbrush and bend it into a U shape.

After knowing how to fix bike gears by yourself, you should move on to checking the chain. You should remove the chain from the cassette. The chain should lie flat on the ground. Check the teeth on the sprocket and compare them with the teeth in the crankcase. The tooth sizes of the crankcase and the sprocket should match. If there is a discrepancy, then there may be some problems with the tension adjustment on your bike.

Tools Required For Changing A Bike Gear

A person sitting on a bench

There are two tools that can be used to change your tooth size. These tools are a mallet and a bench vice. Once you have these two tools, you can start the process of adjusting your teeth. The first thing that you need to do is to find out how many degrees are your teeth are off from each other. In this case, you will need to use the bench vice to hold the mallet up to your teeth until you get the right degree of teeth alignment.

When fixing the bike gears, you need to be sure that you use the right type of tools and products. Some people try to fix their bicycles by themselves without getting the proper tools. This is not a good idea because you can damage your bike. You can either fix it yourself or get a mechanic to do the job. If you have enough money, then you can hire someone who knows how to fix bike gears.

Thing To Keep In Mind While Changing The Bike Gears

The next thing that you should do is to look for any burrs on the chain. Burrs are small bits of metal that can poke through the tape of the cassette. If you find any of these bits on the chain, then you will need to pull it out. However, if you can’t remove it, then you need to file the surface of the teeth.

Last but not least, you should check the front derailleur. The rear derailleur is attached to the bike gears. If it is damaged, then you will not able to make forward and backward movements on the bike. This will also make it difficult to stop. That is why you need to fix your bike gears first before worrying about the front derailleur.

Problems Faced While Changing The Bike Gear

One of the common problems that people have while working on how to fix bike gears is when they are not lubricated enough. If you apply too much grease or oil to the gears, they will not work properly. This will make it difficult for you to make movement and you may also slip. This may cause you to crash. Make sure that you do not apply too much oil or grease because it can cause rust and corrosion.

If you need to know how to fix bike gears, then you should first know how the gears work. It is important for you to know this in order to fix it properly. Aside from applying lubricant to the gears, you should also clean the surfaces to get rid of dirt and dust. Too much dirt and dust can affect the way the gears operate and you may crash unexpectedly.

Final Words

You also have to be careful when you are fixing the teeth of your wheels. Since the teeth are the moving parts, you have to be extra careful when you are doing the repair. The teeth should be aligned properly so that they will not be able to slip. Most importantly, you have to make sure that you are not doing anything to your bike. By learning how to fix bike gears, you will be able to fix the problem easily and safely.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter